Medicines and Healthcare products Regulatory Agency
REGISTRATION OF MANUFACTURER, IMPORTER OR DISTRIBUTOR OF ACTIVE SUBSTANCES TO BE USED AS STARTING MATERIALS IN MEDICINAL PRODUCTS FOR HUMAN USE
1. Registration Number | UK API 1108 |
2. Name or corporate name of registrant | MACFARLAN SMITH LIMITED |
3. Permanent or legal address of registrant | MACFARLAN SMITH LIMITED, 10 WHEATFIELD ROAD, EDINBURGH, EH11 2QA, UNITED KINGDOM |
4. Address(es) of site(s) where registered activities take place |
MACFARLAN SMITH LIMITED, 10 WHEATFIELD ROAD, EDINBURGH, EH11 2QA, UNITED KINGDOM MACFARLAN SMITH LIMITED, THREE TREES ROAD, NEWBIE, ANNAN, DG12 5QH, UNITED KINGDOM |
5. National legal basis of registration |
Regulation 327 of The Human Medicines Regulations 2012 (SI 2012/1916)
|
6. Name of responsible officer of the competent authority of the member state validating the registration | Confidential |
7. Date | 06/12/2023 |
This registration form is valid only when presented with all pages. The authenticity of this registration form may be verified in MHRA-GMDP.
The registration holder referred to in section 2 shall communicate annually to the competent authority an inventory of the changes which have taken place as regards the information provided in this registration form. Any changes that may have an impact on the quality or safety of the listed active substances must be notified immediately.
SCOPE OF REGISTRATION
MACFARLAN SMITH LIMITED, 10 WHEATFIELD ROAD, EDINBURGH, EH11 2QA, UNITED KINGDOM
1. MANUFACTURING OPERATIONS
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Sieving | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crytsallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying and milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt Formation, Filtration, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt Formation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt Formation, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Sieving | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt Formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt Formation, Filtration, Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Sieving | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Recrystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying and milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
F.2 Microbiological testing (excluding sterility testing) |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
2. IMPORTATION AND DISTRIBUTION OPERATIONS | |||
B | Distribution | ||
FENTANYL CITRATE (2000007584) | |||
CODEINE SULFATE (2000015376) | |||
SUFENTANIL CITRATE (2000006818) | |||
HYDROMORPHONE HYDROCHLORIDE (2000007868) | |||
OXYCODONE (1000007438) | |||
MORPHINE HYDROCHLORIDE (2000008247) | |||
APOMORPHINE HYDROCHLORIDE (2000008051) | |||
METHYLPHENIDATE HYDROCHLORIDE (2000008305) | |||
COCAINE (1000003943) | |||
DIAMORPHINE HYDROCHLORIDE (2000007776) | |||
REMIFENTANIL HYDROCHLORIDE (2000007435) | |||
NALOXONE HYDROCHLORIDE (2000008238) | |||
BUPRENORPHINE HYDROCHLORIDE (2000008277) | |||
MORPHINE SULFATE (4000006163) | |||
DIAMORPHINE (1000003221) | |||
ALFENTANIL HYDROCHLORIDE (2000008540) | |||
FENTANYL (1000002290) | |||
DIHYDROCODEINE HYDROGEN TARTRATE (4000008052) | |||
COCAINE HYDROCHLORIDE (2000007943) | |||
CODEINE (1000003912) | |||
MORPHINE (1000010779) | |||
MORPHINE TARTRATE (2000008245) | |||
CODEINE PHOSPHATE HEMIHYDRATE (4000006570) | |||
BUPRENORPHINE (1000007171) | |||
OXYCODONE HYDROCHLORIDE (2000006722) | |||
PHOLCODINE (1000009886) |
MACFARLAN SMITH LIMITED, THREE TREES ROAD, NEWBIE, ANNAN, DG12 5QH, UNITED KINGDOM
1. MANUFACTURING OPERATIONS
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.4 Other
Hydrogenation | |
E | General Finishing Steps |
E.4 Other
This intermediate supplied to Edinburgh site for further processing as an API | |
F | Quality Control Testing |
F.1 Physical / Chemical testing | |
Other Activities Only intermediate specification testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
A | Manufacture of Active Substance by Chemical Synthesis |
A.1 Manufacture of Active Substance Intermediates | |
A.2 Manufacture of Crude Active Substance | |
A.3 Salt Formation / Purification Steps (e.g. Crystallisation)
Salt formation, Crystallisation. | |
E | General Finishing Steps |
E.1 Physical Processing Steps
Drying, Milling | |
E.2 Primary Packaging | |
E.3 Secondary Packaging | |
F | Quality Control Testing |
F.1 Physical / Chemical testing |
2. IMPORTATION AND DISTRIBUTION OPERATIONS | |||
B | Distribution | ||
METHYLPHENIDATE HYDROCHLORIDE (2000008305) | |||
OXYCODONE HYDROCHLORIDE (2000006722) | |||
DIHYDROCODEINE HYDROGEN TARTRATE (4000008052) | |||
CODEINE PHOSPHATE HEMIHYDRATE (4000006570) |