Medicines and Healthcare products Regulatory Agency
CERTIFICATE NUMBER : UK API 29350 Insp GMP 29350/292119-0006 [V]
Certificate of GMP Compliance Of A Manufacturer(1),(2)
Part 1
Issued following an inspection in accordance with :
Regulation 5 of the current Veterinary Medicines Regulations
The competent authority of United Kingdom confirms the following :
The Manufacturer :
STERLING PHARMA SOLUTIONS LIMITED
Site address :
STERLING PHARMA SOLUTIONS LIMITED,
DUDLEY LANE,
DUDLEY,
CRAMLINGTON,
NE23 7QG,
UNITED KINGDOM
Is an active substance manufacturer that has been inspected in accordance with Regulation 327 of The Human Medicines Regulations 2012 (SI 2012/1916).
From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on 09/06/2021, it is considered that it complies with
- The principles of GMP for active substances referred to in Regulation B17 and C17 of the Human Medicines Regulations 2012 (SI 2012/1916)
This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. This certificate is valid only when presented with all pages and both Parts 1 and 2. The authenticity of this certificate may be verified in MHRA-GMDP. If it does not appear, please contact the issuing authority.
- (1) Guidance on the interpretation of this template can be found in the Help menu of MHRA-GMDP database.
- (2) These requirements fulfil the GMP recommendations of WHO.
Part 2
Veterinary Medicinal Products
Manufacture of active substance. Names of substances subject to inspection:
- [1000000540] CANNABIDIOL
- [1000000359] DIMETHYL FUMARATE
- [2000008583] TRIENTINE DIHYDROCHLORIDE
- [4000009871] POLIDOCANOL
- [1000021010] SELAMECTIN
- [4000009067] OCTENIDINE DIHYDROCHLORIDE
- [4000008591] CERIUM NITRATE
- [2000019613] RACTOPAMINE HYDROCHLORIDE
- [4000014956] LEVALBUTEROL TARTRATE
- [1000000868] ILOPERIDONE
- [1000007171] BUPRENORPHINE
- [1000000247] METHOXYFLURANE
- [1000020604] DIROXIMEL FUMARATE
- [2000007940] CODEINE PHOSPHATE
- [4000002312] LEVALBUTEROL HYDROCHLORIDE
- [2000019612] TOCERANIB PHOSPHATE
- [1000017498] LUMACAFTOR
- [3000018209] TAZEMETOSTAT
- [2000006388] FERRIC MALTOL
- [1000003010] ZILEUTON
- [1000017736] ARFORMOTEROL
- [1000021013] SISAPRONIL
- [1000009451] ACRIVASTINE
- [1000010895] SESTAMIBI
- [4000006214] REBOXETINE METHANESULPHONATE
| 3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES | |
| CANNABIDIOL | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| DIMETHYL FUMARATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| TRIENTINE DIHYDROCHLORIDE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| POLIDOCANOL | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.5 | General Finishing Steps |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| SELAMECTIN | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| OCTENIDINE DIHYDROCHLORIDE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| CERIUM NITRATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| RACTOPAMINE HYDROCHLORIDE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Purified via filtration | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Filtration | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| LEVALBUTEROL TARTRATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| ILOPERIDONE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, (Micronisation) | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| BUPRENORPHINE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| METHOXYFLURANE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| DIROXIMEL FUMARATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| CODEINE PHOSPHATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| LEVALBUTEROL HYDROCHLORIDE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| TOCERANIB PHOSPHATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| LUMACAFTOR | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| TAZEMETOSTAT | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| FERRIC MALTOL | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| ZILEUTON | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| ARFORMOTEROL | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| SISAPRONIL | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| ACRIVASTINE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Milling | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| SESTAMIBI | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 3.6.2 Microbiological testing (excluding sterility testing) | |
| REBOXETINE METHANESULPHONATE | |
| 3.1 | Manufacture of Active Substance by Chemical Synthesis |
| 3.1.1 Manufacture Of Active Substance Intermediates | |
| 3.1.2 Manufacture Of Crude Active Substance | |
| 3.1.3 Salt Formation/Purification steps (eg. Crystallisation) Crystallisation | |
| 3.5 | General Finishing Steps |
| 3.5.1 Physical Processing Steps Drying, Sieving | |
| 3.5.2 Primary Packaging | |
| 3.5.3 Secondary Packaging | |
| 3.6 | Quality Control Testing |
| 3.6.1 Physical / Chemical testing | |
| 08/01/2024 | Name and signature of the authorised person of the Competent Authority of United Kingdom |
| Confidential | |
| Medicines and Healthcare products Regulatory Agency | |
| Tel : Confidential |